77GHz Single Sensor Blind Spot Detection System For Commercial Vehicles
Features :
1, 77G HZ MICROWAVE RADAR SENSOR
2, This system combine the 1 radar sensors, one control box, one buzzer and 1 indicate LEDs.
3, Wide voltage from DC 9V to 36v, it is easy to install on the vehicle, truck, SUV, MPV etc.
4, Measure distance 0.3—20M for truck and 10m for human.
5, Blind spot detection, lane change decision aid system.
6, Led and buzzer alarm, collision warning.
7,When the speed over 0mph,the system will working.
8,Low power consumption, suitable for long-term power work.
9,All cable sockets have self-locking function. To avoid poor contact when the car vibration.
10,High quality and easy to install
Through installing 1pcs of 77GHZ microwave sensors on the left/right side of the Truck/bus, when the truck/bus is moving,if any moving object closer to blind area( 3 meter from right and left side ,20 meters from behind）,the object will be detected by system sensor , the LED indicator will turn on and keep shining for reminding driver,in this condition,if the driver wants to change the lane,the buzzer will beep sounds for reminder
77GHz Single Sensor Blind Spot Detection System For Commercial Vehicles
C9
85.00~90.00
Through installing 1pcs of 77GHZ microwave sensors on the left/right side of the Truck/bus, when the truck/bus is moving,if any moving object closer to blind area( 3 meter from right and left side ,20 meters from behind）,the object will be detected by system sensor , the LED indicator will turn on and keep shining for reminding driver,in this condition,if the driver wants to change the lane,the buzzer will beep sounds for reminder
77GHz Single Sensor Blind Spot Detection System For Commercial Vehicles
C9
85.00~90.00
Through installing 1pcs of 77GHZ microwave sensors on the left/right side of the Truck/bus, when the truck/bus is moving,if any moving object closer to blind area( 3 meter from right and left side ,20 meters from behind）,the object will be detected by system sensor , the LED indicator will turn on and keep shining for reminding driver,in this condition,if the driver wants to change the lane,the buzzer will beep sounds for reminder
